Minion Scarves

I got some special orders for Minion scarves. I did a Google image search and got the basic idea – start with blue for the overalls, add a little bib on the front, do some yellow for the face, a black stripe for the goggles, and then a whole bunch of yellow, and repeat the stripes in reverse on the other side.  I’ve been making Minion hats, cup cozies, and mittens for a while, so I’ve got my way of doing the eyes and hair. Piece of cake.

Here’s how they turned out. 

I started out by crocheting the body of the scarves. I started with the Carl/Dave scarf and decided it was a bit too wide. Then I did the Alan/Ben scarf. I was running out of that shade of blue yarn, so I switched to a different shade of blue for Ernie/Fred.








This will be a very "loosey-goosey" pattern... I'll give you the basics and you can adapt it to your needs... adult scarf, kid's scarf, short scarf, long scarf.


I think I measured and counted for the Alan/Ben scarf, so these instructions are for that one, a narrower, longer scarf.

Crochet hooks: Sizes G & J
Bright Yellow yarn (about 4 ounces) (I used Red Heart Super Saver Bright Yellow)
Blue yarn - something close to the color of blue jeans (about 1 ounce)
Small amounts of silver or gray, black, white and brown yarn
Sew-on gemstones or small black buttons
Yarn needle

Scarf Body

With Size J hook and blue yarn, chain 20. DC in third stitch from hook and each stitch across (17 dc).
Each row - Either chain 3 to start row or do a standing DC - dc in each stitch across.


Color Pattern:
7 rows blue
7 rows yellow
2 rows black
74 rows yellow (try the scarf on and see if your last row of yellow is at the same level as the first row of yellow after the black stripe on the other side of the scarf. Add rows if needed to get to the right length)
2 rows black
7 rows yellow
7 rows blue

Once you've got the body of the scarf done, you'll need to make eyes, mouth, Gru logo, and hair.

Eyes:
(I put 3 on each scarf - one on one side, two on the other. You could get away with only one eye on each side, or two on each side. Like I said, you can adapt this scarf to your preferences.
Eye is a circle with brown in the center, then white, and silver or gray around the outside. Then a small button or sew-on gemstone is sewn in the center.

I pick up these at Joann's when I have a 50% off coupon.

 With size G hook and brown yarn, make a magic ring.
Chain 2, 8 hdc in ring. Pull tight. Slip stitch to join.
With white, 2 hdc in each stitch (16 stitches)
With gray or silver (I used a double strand of a metallic silver Vanna's Choice yarn), chain 2, **work 2 hdc in first stitch, hdc in each of next two stitches,** repeat ** around. End off, leaving a long tail to sew onto scarf.

Eyelid (seen on all the one-eyed Minions)
With Size G hook and yellow yarn, make a magic ring.
Chain 3, 8 DC in ring. Pull tight, but do not join. Leave a long tail to sew on.
The one-eyed Minion has a droopy eyelid. After I made the eye, I sewed the eyelid over the top half of the eye. I tried two ways... sewing it on after the gray/silver round, and sewing it on before the gray/silver, so I could crochet over both layers (white & yellow) when I did the final round. I think I liked the latter best, although it was difficult to keep track of my increases while doing so.

 Gru Logo
With G hook and black yarn, chain 5.
SC in 2nd stitch from hook and each stitch across (4 sc). Ch 1, turn
Rows 2-4: SC in each stitch across, ch 1, turn.
Leave a long tail for sewing on. (Note: save your scraps of black yarn after you sew this piece on... they can be used for hair later!)

With blue yarn, embroider the Gru G on the square. Turn the square sideways so it makes a diamond. Using the diagram above, stitch the following:
1-2
3-2
3-4
5-4
6-5
Tie blue yarn off on wrong side.

Mouth:
Skinny mouth  (on Ernie and Alan)
With black yarn and size G hook, chain 15. Leave a long tail to sew on.

Thicker mouth (on Fred and Dave):
With a double strand of black yarn and size J hook, chain 12. Leave a long tail to sew on.

Half-Moon smile (on Ben):
With size G hook and black yarn, chain 18.
Slip stitch in second slip from hook, sc in next 2 stitches, hdc in next two stitches, dc in next two stitches, treble crochet in next 3 stitches, dc in next two stitches, hdc in next two stitches, sc in next 2 stitches, slip stitch in last stitch. End off, leaving tail to sew on. With white yarn, embroider tooth.

(Note: save your scraps of black yarn after you sew this piece on... they can be used for hair later!)

Ernie & Fred

Carl & Dave

Alan & Ben

Bib:
With blue yarn and size J hook, attach yarn 5 stitches from the right on the right side of your scarf, in the place where you changed from blue to yellow. Chain 3 and work a DC in each of the next 7 spaces. You should have 8 DC centered on your scarf. Turn
Either Chain 3 or do a standing double crochet, and do a dc in each of the remaining stitches (8 dc). Make a chain long enough to reach to the edge about 3 rows up. End off, leaving about 24" of yarn. Use yarn end to sew chain to scarf, then sew the top of the bib to the scarf.

When you do the last stitch to sew the bib to the scarf, capture a loop on the crochet hook. Make another chain that reaches to the edge of the scarf at the same height as the other chain. Use remaining yarn to sew that side to the scarf.

Hair:
Using 3-4" sections of black yarn, tie above the eyes in whatever pattern you desire... one big clump, several small clumps, a bunch of single hairs.

February 23 update... a new scarf: 

Gertie & Henry!

 

In Despicable Me 2, there were two girl minions: One in a polka-dot green dress who went to the mall with Gru, and one acting as his secretary in the scene where he was mustering up the courage to call Lucy for a date. I decided to try my hand at recreating one of them in a scarf. Here’s Gertie!

Gertie skirt:

Pattern is based on 18 stitches across. Start with green yarn and size J hook. Chain 20. DC in third stitch from hook and each chain (18 stitches)

Row 2, 4, 6: Standing Double Crochet  to start, DC in 2 stitches, **white cluster in next stitch,  dc in next three stitches with green**, repeat across, ending with 2 green

Rows 3, 5, 7: Work 4 dc in green, **white cluster in next stitch, dc in next three stitches with green**, repeat across, ending with 5 green

Row sequence for Gertie:

Skirt – 7 rows

Face – 7 rows yellow

Goggle strap – 2 rows black

Forehead – 2 rows yellow

Hair – 2 rows orange

For braids, cut 24 stands of yarn about 15” long. (I wind yarn around a small notebook to get multiple strands of the same size in a hurry.) Thread 6 strands through each of the end DC in each row of hair. Braid tightly and knot at the end. Unravel yarn after knot to give a poofier look.

Gertie Eye:

With brown and size G hook

Round 1: Magic ring. Chain 1, 8 hdc in ring. Pull tight, join.

Round 2: With white,  chain 1, 2 hdc in each stitch around. Join.

Round 3: Chain 1, *2 hdc in first stitch, hdc in next stitch,*  repeat around. Join.

Round 4: With Silver or gray, Chain 1, *2 hdc in first stitch, hdc in next 3 stitches*, repeat around. Join. End off, leaving a long tail to sew on.

Sew a large sew-on gemstone in center of eye.

Henry’s eyes (make 2):

With white and size G hook:

Round 1: Magic ring. Chain 1, 8 hdc in ring. Pull tight, join.

Round 2: Chain 1, 2 hdc in each stitch around. Join.

Round 3: With Silver or gray, Chain 1, *2 hdc in first stitch, hdc in next 2 stitches*, repeat around. Join. End off, leaving a long tail to sew on.

Sew a large sew-on gemstone at left edge of eye.

March 18 update: 
Phil (French Maid) version of scarf

For this one, the body of the scarf was the same until the last 7 rows of DC, which I did in black (for Phil's Skirt). Then I added a row of white, where I did (SC, chain 3) in each stitch for the ruffle at the bottom.

Bow:

With white, chain 10. Make hdc in 2^nd chain from hook and each chain across (9 hdc)

Row 2: chain 2, hdc in each stitch. End off and tuck in yarn ends.

Tightly wind yarn around the center of the bow about 10 times. Tie off at the back and sew at the center of the black “skirt”. 

Apron:

With white, chain 24.

HDC in 2^nd chain from hook and in next 12 stitches.

Rows 1-4: Turn, chain 2, work a decrease over the next two stitches. HDC to within 2 stitches of the end, work a decrease.

Slip stitch back up to beginning chain. Work  *SC, chain 3* in each stitch around the apron. Chain 12 for other apron string. Sew apron to front of skirt.

Top frill:

With white, make a chain long enough to reach across scarf with a slight arc. I think my chain was about 30 stitches, but I lost count and just worked by measuring it against the scarf.  Make a DC in the third chain from the hook, then a treble crochet and another double crochet in the same stitch. Continue down the chain, making DC/TR/DC in each chain. Leave a long tail for sewing on.

Latest update... 4/3/14... Purple Minions
I made a purple minion scarf using elements of the scarves above.

Done with the first "face"

All done... late at night, so lighting wasn't all that good for the picture.

Instead of starting with blue, I started with black. The basic scarf was the same: 7 rows black, 7 rows purple, 2 rows black, purple until it's long enough, 2 rows black, 7 rows purple, 7 rows black.

For the teeth, I started with a chain 3. Slip stitch in 2nd chain and third chain from hook. That makes a small tooth. Chain 4, slip stitch in 2nd stitch from hook and next 2 stitches. That makes a large tooth.

Decide how many teeth, whether large or small, you want, and just keep repeating the pattern. If you want the teeth spaced out a bit more, you can do one extra chain and leave that extra chain unworked when you make a tooth.

 For the hair, I cut lengths of yarn about 6" long. For the one-eyed Minion, I tied it in a clump centered above the eye. For the two-eyed minion, I did more of a center part.  I put 4 pieces of yarn (doubled to 8 strands when tied) on each of 4 DCs, the two center double crochets of two rows.

Grumpy Cat Hat

Right now I have a long list of projects to work on. I have a craft show coming up on March 1 that I'm trying to restock for. I have eleven items on special order, with three of them being for February birthdays. None of that mattered last night. I was bored with following patterns and wanted to see what I could whip up from the bag of scrap yarn beside my chair. There were some very small balls of brightly colored yarn in there from the Rainbow Sock Monkey hat I finished up over the weekend. I looked through my "inspiration folder" (patterns and pictures I've printed out lately that haven't made it into my pattern notebooks yet) and saw the pattern for a Grumpy Cat stuffed animal. I wanted to try making a hat similar to that pattern, but knew I'd have to make some changes. It used screw-on animal eyes, which certainly wouldn't work on a hat. I had a ball of white yarn, and some scraps of brown, blue, black and pink, so I got started.

As I said, I had just made a sock monkey hat from Sarah Zimmerman's Crochet Sock Monkey Hat pattern over the weekend, so I used her instructions, a size H hook and white knitting worsted (about 1.3 ounces) to make the beanie itself. (I made a 0-3 month size.) Below are the instructions for the embellishments I used to make a plain white beanie into Grumpy Cat.

The  eyes are made in three sections: eye patch, eyeball and eyelid.

Eye Patch (Make two)
With brown yarn and size G hook, make a magic ring.
Round 1: Ch 1, make 8 hdc in ring. Pull to close. Join with slip stitch
Round 2: 2 dc in each stitch (I like to start my rows with a chainless double crochet rather than a chain 3. Here's a tutorial on how to do it.
Round 3: 2 dc in first stitch, dc in next, repeat around. End off, leaving long tail to sew on.

Pupil (Make two)
With blue and size G hook, make a magic ring.
Round 1: Ch 1, 8 hdc in ring. Pull to close. Join with slip stitch. End off, leaving long tail to sew on.
Thread a yarn needle with black yarn. Using a double strand of yarn, make a long stitch from top to bottom of the eyeball.

Eyelid (make two)
With brown yarn and size G hook, make a magic ring.
Chain 3, make 8 double crochet in ring. Pull tight, but do not join. End off, leaving long tail to sew on.

Sew Pupil to Eye patch, then sew on eyelid.

Nose:
With pink yarn and size G hook, chain 8.
Row 1: Sc in 2nd stitch from hook and each stitch across (7 sc). Chain 1, turn.
Row 2: SC decrease in first two stitches, sc in next 3 stitches, SC decrease in next 2 stitches. (5 stitches). Chain 1, turn.
Row 3: SC decrease in first two stitches, sc in next stitch, SC decrease in next 2 stitches. (3 stitches). Chain 1, turn.
Row 4: SC decrease in first two stitches, sc in next stitch, (2 stitches). Chain 1, turn.
Row 5:  SC decrease in first two stitches (1 Stitch). End off, leaving long tail to sew on.

Mouth: With pink yarn and size G hook, chain 10. End off, leaving long tail to sew on.
(Note: I started by chaining 20, but when I positioned it on the hat, it was much too long. If you're making a larger hat, and have more room for the mouth, you can make a longer chain.

Sew nose on hat. Sew mouth chain under nose (I folded  the chain in half and positioned the mid-point directly under the point of the nose to make sure it was even.)

Ears:

With brown and size G hook, chain 10, leaving enough yarn before your chain to sew ear to hat.
Row 1: Sc in 2nd stitch from hook and each stitch across (9 sc). Chain 1, turn.
Row 2: SC decrease in first two stitches, sc in next 3 stitches, SC decrease in next 2 stitches. ( 7 stitches). Chain 1, turn.
Row 3: SC in each stitch across. Chain 1, turn.
Row 4: SC decrease in first two stitches, sc in next 3 stitches, SC decrease in next 2 stitches. ( 5 stitches). Chain 1, turn.
Row 5: SC in each stitch across. Chain 1, turn.
Row 6: SC decrease in first two stitches, sc in next 3 stitches, SC decrease in next 2 stitches. ( 3 stitches). Chain 1, turn.
Row 7: SC decrease in first two stitches, sc in next stitch, (2 stitches). Chain 1, turn.
Row 8:  SC decrease in first two stitches (1 Stitch). Turn (without making a chain).
Row 9: Slip stitch in first stitch. End off.

Buffalo Hat

Since I posted the picture of the buffalo hat (made for a charity benefit) on Facebook, I have had a number of people ask me for the pattern.I don't have the hat in my possession any more to count stitches or make measurements, but I can give some guidelines on how I made it.

When I was asked to make a hat that looked like a buffalo for the upcoming Janice Cline Stem Cell Transplant Benefit, I did some internet searches for "buffalo hat". I've grown up seeing cartoons of buffalos all my life... living in the Buffalo, NY area. I had a very definite idea of what a buffalo should look like!  So, I just kept a few pictures in front of me and started working.

When I design a hat, I'm working with two basic tools: a chart of measurements so that I know what the finished size should be, and a basic pattern for a top-down hat.

Here is a link to a great chart for hat measurements: How to size crocheted hat I could see from my chart that for an adult hat, I needed to make a circle about 7" across.

The second item is a basic pattern for a top-down hat.
Round 1: 6 stitches in a ring (either a "Magic Ring" or chain 3 and slip stitch to form a ring)
Round 2: increase in each stitch
Round 3: *increase in first stitch, one stitch* repeat around
Round 4: *increase in first stitch, two stitches* repeat around
You get the idea... with each round, you're putting one more stitch between your increases. If you're doing single crochet, you don't have to join your rows. You can just keep working in one continuous row, using a stitch marker to let you know when you're starting a new row and need to change your increase numbers. For taller stitches, like half-double crochet or double crochet, you would need to join your rows and make a starting chain to start the next row.

You'll notice I just said "stitches"... you can make hats with single crochet, half-double crochet, double crochet, loop stitch, etc. Once you're got the basic pattern down, and a chart to tell you what size you're shooting for, you can adjust the hat to your own liking. The hat above used loop stitch to start out, for the shaggy look, and double crochet for the body of the hat.

You'll need:
Size J, H & G crochet hooks
Two shades of brown yarn
Small amount of white yarn for eyes
Small amount of off-white yarn for horns
Two small black buttons for eyes
Two medium black buttons (or "gemstones") for nostrils
Yarn needle
4 stitch markers

Okay, on to how I made the hat.
I had some yarn in my stash that was a bit heavier than knitting worsted. It was brown with black highlights (a thin, textured black yarn with a little bit of "eyelash" to it). I only had a little over an ounce of it, so I asked my daughter to find me a coordinating brown for the rest of the hat (I'm awful with matching colors). Shout out to Bethany for going down into the cold, cold basement to search through the brown yarn tote for me!

I started with a size J hook and did my first round of 6 single crochets in a magic ring. Then I switched to loop stitch and just keep on going until I ran out of yarn. Since it was hard to keep track of where my rows started under all those loops, I kept a stitch marker on the back side of my work.  My circle was about 6" across when I ran out of yarn. I was in the middle of a row, but loop stitch is forgiving... I switched to the brown knitting worsted and changed to double crochet, making that the new start of my row. When my circle got to 7" across (one row of dc), I stopped increasing. I worked even on those rows until the hat was long enough (I tried it on rather than measuring).

Marking earflaps:
Set the hat down flat with the seam where you joined your rounds at the center back. Place a marker one inch from each side. Flip hat over and place two more stitch markers, each 2" in from the sides. You'll have two 3" sections marked off on your hat for where the earflaps go. Now join yarn by one of  your markers.
Row 1 (and all odd rows): SC in each stitch. Chain 1, turn
Row 2 (and all even rows): Decrease over first two stitches. Work to within two stitches of end, work a decrease over those two stitches. Chain 1, turn.
Keep repeating those two rows until you have one or two stitches left. Finish off, leaving a 12" strand that will end up in your braided tie. Repeat for other 3" marked section for other earflap.

Braided tie:
I wrapped yarn around a 3-ring binder (top to bottom)  24 times and then cut it to get a bunch of strings for the ties. I put 8 at a time through stitches at the bottom of the earflap and then braided them. When I tied the end and trimmed them, I saved the yarn for stuffing the snout. (Can't you just hear your Grandma's voice saying "Waste not, want not"?)

Eyes:
Several of the pictures I looked at online had button eyes for their buffalo hats. I thought "Buffalos are BIG creatures. They have BIG eyes. I want something that pops out... something like those eyes I put on the octopus cup cozy a while back. So... I borrowed the eye pattern from this pattern. 


Horns (make 2):
I started with a size G crochet hook and off-white yarn. I made 3 sc in a magic ring and kept doing SC in a continuous round, increasing here and there, and doing half-double crochet on one side to give it that little bit of a curve. When I got to about 2" long, I ended off, leaving a long tail for sewing them on. Here is a pattern for horns if you would like more exact details.

Snout:
Using the same color as the body of the hat and Size G hook, I made a chain about 1.5" long. I did one SC in the second chain and each chain across, then two more (total of three) in last chain. Then I did one SC in the back side of the chain, ending with two more in the same chain as the first sc on other side. This makes a long oval. I kept working around the oval, increasing at the four "corners". When the snout got to the right size (about 3-1/2 inches), I did 2-3 rows of single crochet without increases to make it "cup up" a bit. Finish off, leaving a long tail to sew on. Sew two medium size buttons or black gemstones on for nostrils.
Gemstones on Amazon


Ears (make 2):
Using the same color as the body of the hat and Size G hook, chain 5 (leave yourself 6-8" of yarn before your chain to sew ear on later).
Row 1: SC in 2nd chain from hook and each chain across. Ch 1, turn
Row 2: Increase in first stitch, sc in each stitch across rest of row. Ch 1, turn.
Row 3: Increase in first stitch, sc in each stitch across rest of row. Ch 1, turn.
Rows 4-6: Work even in SC
Row 7: Work a decrease over first two stitches. Work to last two stitches, work decrease. Ch 1, turn
Repeat Row 7 until you have one stitch left.  Finish off and weave in yarn end.

Sew on parts according to picture above. For an added touch (I thought of this while getting ready for work this morning), you could put a snap-ring in the bottom of the nostril.

The Story of the Four Bears

You’ve heard the story of Goldilocks and the three bears. Here’s the story of the four bears.

I am involved in a fundraiser for a friend, a local pastor’s wife who was diagnosed with a blood cancer, Multiple Myeloma, over four years ago. The last four years has been a constant stream of doctors visits, hospital stays, medications and treatments.  Medical bills not covered by insurance have added up to $75,000. Friends and family of Janice Cline have come together to put on a benefit on March 15, 2014 with the theme "Bear ye one another's burdens" (Galatians 6:2), in an attempt to help ease the financial burden of those medical bills.

You know, I wish I could write up a big old check for this cause. Janice was librarian at the school my girls attended, then started teaching 4^th grade. She has been a faithful fan at school games when her health permitted.  We have been called “the knitting twins” because we bring our current craft projects to basketball & volleyball games and work on them while cheering on the Falcons.

But this is a year of strict budgeting for me. A period of unemployment last year squeezed our finances. This year we have a wedding to pay for, and a vehicle that sorely needs to be replaced. Instead of giving of my money, I need to focus on giving my time and my talents. I have already made a bear hat/scarf set to build a gift basket around, and I’m also going to make up a Buffalo hat like this one and a hat or scarf in Buffalo Sabres colors. I'll keep my fingers busy making items for the craft table I will have at the event, where a percentage of my sales will also go toward the fundraiser.

So, as I was trying to fall asleep one night, I was thinking of projects I might be able to make for the upcoming benefit. There will be a live auction and a number of silent auctions of gift baskets. As I thought of the theme, “Bear ye one another’s burdens,” I thought of making bear cup cozies. I thought that if I made four cute bear cup cozies, I could put them on disposable cups in a cup holder, and make up a gift basket with a gift card to a local coffee shop. The next day, I started working on the cup cozies, and the photo above is how they turned out.

Now all I need is a “sponsor” to buy the gift card for Tim Hortons! 

And here are the patterns for all four: 

 

Brown Bear:

Uses Size H hook

About 1 oz knitting worsted weight yarn - brown

Small scraps of off-white and black yarn

Two black buttons (I used 1/2”, with 4 holes)

With brown yarn, make a half-double crochet foundation chain of 30 stitches (or an even number just long enough to fit around your cup). Join with a slip stitch.

There is a tutorial on how to do a half-double crochet foundation row here http://www.ehow.com/how_12102336_crochet-base-foundation-halfdouble-crochet.html

Row 1: Ch 2, *raised hdc, hdc* around

(You work a raised hdc by inserting your hook behind the stitch, rather than through the top loops). By alternating raised and regular stitches, you get a ribbed texture and a bit more stretchiness to your work.

Repeat Row 1 until your cozy is the desired height. I worked 12 rows to get about 3-1/2”. Join with slip stitch on the last row, but don’t cut your yarn just yet!

Ears: Skip 2 stitches. Do 7 double crochets in third stitch. Skip 2 stitches. Slip stitch in third, fourth and fifth stitch. Skip 2 stitches. Do 7 double crochets in the next stitch. Skip 2 stitches. Slip stitch in next stitch. Now you can cut the yarn! J

Nose patch:

With off-white yarn, Chain 5

Hdc in third stitch from hook and next stitch. 3 hdc in next stitch. Work 3 hdc in the back side of the chain, and make 2 hdc in the same stitch as your starting hdc. Join with slip stitch.

Row 2: 2 hdc in first stitch, hdc in next next stitch, 2 hdc in next st, hdc in next two stitches, 2 hdc in next stitch, hdc in next two stitches, 2 hdc in next stitch, hdc in next two stitches, join with slip stitch. (Basically, you are making increases at the four “corners” of your oval). Cut yarn, leaving tail to sew onto body.

Nose/mouth:

With black yarn, Chain 4

Row 1: SC in second chain from hook and each chain across (3 stitches)

Row 2: Work a SC decrease on first two stitches, then a SC in next stitch (2 stitches)

Row 3: Work a SC decrease across both stitches (1 stitch)

Chain  4. Cut yarn, leaving about 20”

Sew onto nose patch, starting with the chain four. See the picture to see how the mouth curves up a bit. Sew around the top of the nose. When you get to your last stitch at the bottom, make a loop on your crochet hook as you pass the needle through to the wrong side of your work. Bring the yarn back up to the right side just under the nose and chain 4. Now use the rest of the yarn to sew that chain 4, just like you did with the other side.

Sew nose patch onto cup cozy. Tuck in yarn ends. All done! 

Polar Bear:

Uses Size H hook

About 1 oz knitting worsted weight yarn - white

Small scraps of black yarn

Two black buttons (I used 1/2”, with 4 holes)

Follow instructions for brown bear, but with white yarn. Don’t do a nose patch. Just put the Nose/Mouth directly onto the cup cozy.

Koala Bear:

Uses Size H hook

About 1 oz knitting worsted weight yarn - gray

Small scraps of white and black yarn

Two black buttons (I used 1/2”, with 4 holes)

Make cup cozy with gray yarn. When you finish off, don’t cut the gray yarn. Attach white yarn and do ears in white. Cut white yarn. Go back to your gray yarn and do SC over the stitches of the ears.

Koala Nose:

With black yarn, chain 7.

Row 1: Hdc in 3^rd stitch from hook and each stitch (5 stitches.

Row 2 and Row 3: Chain 2, turn, hdc in each stitch

Row 4: Skip 2 stitches. 7 Double Crochet in next stitch. Skip two stitches. Slip stitch in last stitch. Cut yarn, leaving 8” or so for sewing to cup cozy.

Panda Bear:

Uses Size H hook

About 1 oz knitting worsted weight yarn - white

Small scraps of black yarn

Two white buttons (I used 1/2”, with 4 holes)

Make cup cozy with white yarn.

Ears (Make 2): Make magic ring. Chain 3 and make 8 hdc in ring. Pull tight, but don’t join stitches with slip stitch.  Chain 3 and turn. Make 2 hdc in each stitch. Cut yarn, leaving 6” or so for sewing to cup cozy. The ear is in a “Pac-Man” shape. Sew one side of his mouth to the top of the cup cozy, and the other side to one of the ribs of the cozy.

Nose: Follow directions for brown bear nose, but don’t do the chain 4 at the end.

Eyes: Make 2: Make magic ring. Chain 3 and make 10 dc in ring. Pull tight. Join with slip stitch. Cut yarn, leaving 6” or so for sewing on.

Sew a white button to each eye, slightly off-center towards the bottom.

Sew eyes and nose to cup cozy as shown in picture.

If you would like to show your appreciation for the free patterns, please consider making a donation to Janice's Stem Cell Transplant fund. You can give through the Give Forward website, or contact me if you would like to contribute toward the coffee gift card for this gift basket. Every little bit helps!